SILK GEAR OIL EP-220

SILK GEAR OIL EP-220 Is premium quality industrial gear lubricants having excellent thermal and oxidation stability, good demulsibility, low foaming tendency and provide rust and corrosion protection to metal surfaces. This oil meet AGMA standard 250.04, ASLE standard G-315, G-1000, G-1500, G2150, IS:8406-1993, US Steel requirement No. 222 and 224 and IPSS:1-09-003 specifications. Silk Gear oil EP-220 is recommended for all heavy-duty enclosed gear drives with circulation or splash lubrication system operating under heavy or shock load conditions up to a temperature of 200 C. These oils can also be used for plain and roller bearings, sliding surfaces, chain drives, sprockets, flexible couplings employing splash, circulation or spray lubrication systems requiring EP type oils.

SILK GEAR OIL EP-320

SILK GEAR OIL EP-320 Is premium quality industrial gear lubricants having excellent thermal and oxidation stability, good demulsibility, low foaming tendency and provide rust and corrosion protection to metal surfaces. This oil meet AGMA standard 250.04, ASLE standard G-315, G-1000, G-1500, G2150, IS:8406-1993, US Steel requirement No. 222 and 224 and IPSS:1-09-003 specifications. Silk Gear oil EP-220 is recommended for all heavy-duty enclosed gear drives with circulation or splash lubrication system operating under heavy or shock load conditions up to a temperature of 200 C. These oils can also be used for plain and roller bearings, sliding surfaces, chain drives, sprockets, flexible couplings employing splash, circulation or spray lubrication systems requiring EP type oils.

SILK GEAR OIL EP-460

SILK GEAR OIL EP-460 Is premium quality industrial gear lubricants having excellent thermal and oxidation stability, good demulsibility, low foaming tendency and provide rust and corrosion protection to metal surfaces. This oil meet AGMA standard 250.04, ASLE standard G-315, G-1000, G-1500, G2150, IS:8406-1993, US Steel requirement No. 222 and 224 and IPSS:1-09-003 specifications. Silk Gear oil EP-220 is recommended for all heavy-duty enclosed gear drives with circulation or splash lubrication system operating under heavy or shock load conditions up to a temperature of 200 C. These oils can also be used for plain and roller bearings, sliding surfaces, chain drives, sprockets, flexible couplings employing splash, circulation or spray lubrication systems requiring EP type oils.

SILK SOLUBLE CUTTING OIL

Silk soluble cutting oil is premium quality water soluble cutting oils, specially developed to form extremely stable milky emulsion even with extreme hard water (400 ppm) leading to excellent tool life and finish, in all metal cutting operations, where cooling is more important than lubrication. They have excellent antirust and anti-froth quality and cause no corrosion of machine, work piece or tool. They do not decompose chemically; leave objectionable odour, cause discoluration and staining. These are operator friendly and economical in use.

This oil is blended from  mineral base oil, emulsifier and other additives.

Silk Soluble Cutting Oil is fortified with EP additive to suit wider range of metalworking operations. It has long service life even in hard water up to 600ppm, provides better lubricity and anti-wear properties.

Recommended for cutting, drilling, shaping, grinding, and other metal removal operations of ferrous and non ferrous materials where high quality of coolant is required. 

PROCEDURE

• Dilution ratio with water varies between 5% to10% depending on severity of machining.
• While preparing emulsion always add cutting oil to water (not the other way round) to prevent inversion of the emulsion.
• Clean the Coolant reservoir and system periodically, recharge the system with 1% solution of Coolant to be charged and circulate for at least 1 hr. and then drain completely.
• Check the emulsion strength regularly and top up if necessary.

PERFORMANCE LEVEL

IS 1115-1986 specifications.

PACKING

205L, 50L, 20L